• English
  • Japanese

Example of setting when using Windows 10

The following is a brief explanation of network settings to use an information wall socket.

[Start] menu screen

[1] Click the [Windows] mark on the lower left of the screen to display the [Start] menu.
[2] Select [Setting].

[Setting] screen

Select [Network and Internet].

[Network and Internet] screen

[1] Select [Ethernet].
[2] Select [Change option of adapter].

[Network connection] screen

[1] Select [Ethernet].
[2] Select [Change settings of this connection].

[Properties of Ethernet] screen

[1] Select [Internet protocol version 4 (TCP/IPv4)].
 ※ Do not remove the check.If you remove the check, you will not connect to the Internet.
[2] Select [Properties].

[Internet protocol version 4 (TCP/IPv4) Properties] screen

[1] Select [Automatically obtain an IP address].
[2] Select [Automatically obtain the address of the DNS server].
[3] Select [Detailed settings].

[TCP/IP detailed setting] screen

[1] Select [DNS] tab.
[2] Remove the check from [Record address of this connection to DNS].
[3] Select [OK].

[Internet protocol version 4 (TCP/IPv4) Properties] screen

Select [OK].

[Properties of Ethernet] screen

Select [Close].

Last-Modified: February 18, 2019

The content ends at this position.